RK Water provides micro-bubble generating diffusers for The Wastewater Aeration Market
The Vertical Diffusers are constructed of engineering plastics and can be used as high volume air diffusers. Compressed air enters at the bottom of the diffuser assembly through an ejector device creating vacuum which draws in large amount of water through the diffuser body. The water and air mixture gets mixed thoroughly in a vane type arrangement and then the air is fractured into micro bubbles in a set of specially designed bubble breaker device which forcibly dissolve oxygen into water. Circulating flows are formed by powerful upward air flows which evenly churn the entire tank resulting in high agitation and oxygen transfer. Volume of activated sludge sucked into the aerator is about 1.3 times than the air supplied because of strong negative pressure created in the ejector assembly. Air discharge opening is about 30mm and so operated without any clogging issues even in liquid with large particles.
FEATURES
- Completely constructed of engineering plastic
- High air flow about 100 m3/hr.
- One Vertical diffuser can replace 20 disc diffusers or 10 tube diffusers
- High Oxygen Transfer
- No clogging – Air discharged from large opening
- High volume circulation about aeration tanks
- No sludge build-up
- No need for periodic chemical cleaning
- No downtimes for maintenance
- OTR maintained at constant efficiently for lifetime
- No replacement needed
- Even after 15 years it performs just like new
